We have a great sale going on right now
for new customers. Book a detail for 99¢! *
CONTACT US
Johnny Detail. Sea-Doo detailing. Six care chapters introduce material-specific cleaning and conditional finish decisions.
Start with the exact model. Secure the craft; identify its materials. The model operator guide, stable approved support and material record appear beside the cool craft. Loose gear is removed before cosmetic washing.
Rinse exterior salt gently. Exterior washing is separate from exhaust flushing. Gentle freshwater travels over accessible cosmetic shell surfaces while intakes, electrical openings and bonded mat edges remain protected. No engine or flushing sequence is shown.
Treat deposits only as needed. Use model and material-compatible products. An approved small test area precedes selective salt-removal treatment. The chosen label governs application and complete rinsing with contained runoff.
Record the next care tasks. Separate stains, damaged finishes and service concerns. An inspection highlight follows the exterior and mat boundaries. A record separates removable stains from cracks, damaged decals and concerns needing appropriate service.
Know the hull construction. Not every Sea-Doo finish is gelcoat. Distinct material swatches beside the craft establish that the actual hull may differ from boat gelcoat. A localized stain is assessed before product selection.
Wash the approved exterior. Use a clean mitt and separate rinse bucket. A clean mitt follows approved non-contact exterior panels in light straight passes. Frequent rinsing separates grit from the wash solution.
Keep correction conditional. Skip unknown materials, decals and matte finishes. An inspection lamp marks a small confirmed compatible test area. Any limited refinement remains inside that area; unsupported generic gelcoat compounding is not shown.
Protect only approved non-contact finishes. Wax or coating are alternatives, not mandatory layers. Separate wax/sealant and coating choices lead to one approved system on clean non-contact finish. Seat, grips, boarding step and mats remain excluded.
Rinse loose deck grit. Keep water gentle around bonded mat edges. The overhead rider deck shows distinct traction mats, seat and glossy casing. Gentle water lifts sand without forcing it beneath bonded edges.
Choose a mat-approved cleaner. Remove oily film without adding slippery products. A material-approval record precedes a small cleaner application on actual traction material. Wax, oily dressing and coatings remain excluded.
Brush accessible texture softly. Leave bonded edges and safety labels undisturbed. A soft brush works one footwell pad in small controlled passes; the brush never enters underneath a mat edge or abrades a safety label.
Dry and check normal grip. Record damage; dressing cannot repair traction. Towels remove cleaner residue and moisture. Inspection records torn or loose mat edges without applying any cosmetic dressing or claiming mechanical certification.
Care for actual accessories. A riding seat is not boat upholstery. Loose sand lifts from the saddle while the actual removable cover or liner is staged separately under its own care instructions.
Treat stains without flooding seams. Choose approved products and address trapped moisture. Controlled cleaner application treats a small approved stain. The saddle seam and foam remain unflooded; a moisture-source record accompanies care.
Keep the riding seat grippy. Remove residue; skip wax and oily dressing. A soft cloth cleans the saddle in small sections, then fresh cloths remove residue. Rider contact surfaces retain their normal texture without protection product.
Dry and refit correctly. Follow the seat, cover and liner instructions. The actual cover dries separately on a rack. The fully dry seat and liners are refitted by the model instructions and their latches are checked.
Identify accessible hardware finishes. Cosmetic care does not require structural disassembly. A latch, hinge and coated mount are separated by material. The record identifies corrosion or loose fittings without removing safety-critical fasteners.
Clean with controlled moisture. Keep systems and riding contacts undisturbed. A fresh cloth cleans loose salt from approved accessible hardware; no water or cleaner is directed into controls, engine openings or jet equipment.
Polish confirmed compatible metal only. Skip unknown plating, coatings and anodized finishes. A small dedicated applicator treats a confirmed approved cosmetic metal section. The neighboring coated mount stays unchanged.
Buff and document defects. A glossy surface may still need repair. A fresh cloth removes residue around the treated latch; inspection records pitting or damaged finishes rather than attempting mechanical repair.
Use only model-approved access. Stop for suspected fuel leaks or unclear procedures. The exact operator guide defines access beside a closed instrument pod and actual storage opening. Engine and electrical servicing are shown as separate tasks.
Clean the actual storage. Remove damp belongings and wipe approved surfaces. Loose items and a permitted liner are removed. Compatible cleaner on a cloth wipes the accessible recess without direct spraying or hidden disassembly.
Identify and contain contamination. No ordinary vacuum near suspected fuel vapors. A condition record flags standing water, fuel concerns or a suspected leak. Suitable absorbent material and a waste container represent approved collection, with no guessed drain or pump sequence.
Dry and close by the manual. Flushing and maintenance remain separate procedures. Approved surfaces and removable liners finish fully dry. Tools are counted out, latches are refitted by the model guide and unresolved concerns stay documented.
Inspect. Document. Explain.. Check clean, dry surfaces and record remaining concerns.
Care matched to your vehicle. Included work depends on package, condition and material approval.
Read the complete checklist. /guides/sea-doo-detailing Johnny Detail. /guides/sea-doo-detailing.
A personal watercraft stored in The Woodlands may return from different waters. Describe recent exposure and show visible residue, then identify the make and model. The hull, seat and footwells should each be discussed by condition. Local water amenities do not establish where powered-watercraft use or service activity is allowed.
If several family members use the machine, collect their specific concerns into one request. Note the model year, any replacement seat cover and the history of damaged graphics. Distinguish a cosmetic enquiry from an operator-guide question so the proposed appointment addresses appearance without taking responsibility for unfamiliar mechanical instructions.
Point out decals, previous protection and any seat or pad damage. Glossy hull areas, textured standing pads and grips need different approaches. Cosmetic products should not compromise traction or control. Aged upholstery, deep gouges and loose graphics may have limits that cleaning cannot overcome.
Number close-up photographs from bow to stern and mark the requested upper-deck zone on an overall view. Show mirror housings, the handlebar surround and latch recesses if these are priorities. Describe replacement parts independently of factory panels, using their supplier’s material information where available. This creates a component list without presuming disassembly, adhesive removal or a cosmetic-restoration procedure.
A trailer, rack or tight storage bay can block hull access. Photograph supports and restraints and confirm property permission for the work. Explain clearance around the craft and any gate restrictions. Lifting or transport should be discussed independently instead of assumed to accompany an appearance-cleaning request.
Review the current personal-watercraft package and confirm any extra residue or protection work. Follow the exact operator guide for flushing, inspections and storage after the relevant exposure. Those requirements remain separate from appearance care. Clean panels and rider areas cannot establish engine health or readiness for another water outing.
Yes, describe actual water exposure and current deposits. The make, model and material condition should guide the care discussion.
No. Check watercraft access and use rules separately. Detailing requires its own approved property and workable support arrangement.
It can. Send photos of supports and clearance so the reachable cosmetic scope is understood before the appointment.
Do not assume it is. Follow the operator guide and confirm mechanical procedures separately from cosmetic cleaning.
No. Deposits, etched surfaces and physical scratches differ. Photos help set reasonable improvement goals for the actual material.
Please note that a $8.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $13.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $18.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $9.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $15.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $22.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $10.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $18.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $30.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $12.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $20.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $35.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Plan your next detail
Tell us what you drive, how you use it, and where you would like your mobile appointment.
Use a surface-by-surface approach to Sea-Doo water spots, with compatibility checks for mirrors, decals, plastics, metals, and engine compartments.
Read the guide
Compare UV protectants for jet ski vinyl seats by material compatibility, finish, application directions, and storage habits that limit sun exposure.
Read the guide
Review post-ride Sea-Doo hull washing and saltwater care, with model-specific flushing steps, gentle tools, drying, and corrosion checks.
Read the guide
