We have a great sale going on right now
for new customers. Book a detail for 99¢! *
CONTACT US
Johnny Detail. Auto detailing. Six care chapters introduce material-specific cleaning and conditional finish decisions.
Start with the wheels. Rinse cool wheels before cleaning. A gentle rinse loosens grit on cool wheel faces and sidewalls before any cleaner or brush touches them.
Use dedicated wheel tools. Separate dirty-area brushes from bodywork tools. A dedicated tire brush loosens remaining dirt; a separate soft brush follows accessible wheel faces while avoiding brakes and seals.
Clean the accessible recesses. Choose products approved for the wheel finish. Approved wheel cleaner and a suitable small brush address accessible wheel recesses. A label-check marker precedes use; cleaner is rinsed before drying.
Finish the sidewalls. Dry first. Keep dressing on sidewalls only. A dedicated towel dries the wheel before a small applicator treats the clean tire sidewall, keeping product off the tread.
Loosen dirt before contact. Work from upper panels toward lower dirt. Loose dirt rinses from upper car bodywork down toward the lower panels. Surface grit lifts before the wash mitt approaches.
Keep the wash mitt clean. Use separate wash and rinse buckets. A clean mitt makes light controlled passes on bodywork, returns to the rinse bucket, then reloads with wash solution. Dirty lower tools remain separate.
Decontaminate only as needed. Match the product to the actual finish. A finish check leads to targeted decontamination only where required. On riders, matte surfaces, decals and unknown plastics are excluded from paint-specific treatment.
Rinse, dry and inspect. Use approved methods on seams and clear surfaces. Final rinsing removes wash residue; clean towels dry the car, followed by separate jamb and exterior-glass wiping.
Clear the care area. Remove loose belongings before cleaning. Floor mats lift out for separate care. Loose debris and pet hair are removed before the interior is vacuumed.
Reach the hidden dust. Brush vents and vacuum accessible crevices. A soft brush lifts dust from vents and crevices while a vacuum collects it. A cloth wipes compatible interior panels without wetting electronics.
Clean fabric in sections. Extract cleaning solution; respect material limits. Compatible fabric is shampooed and extracted in small sections. Tools stay off bonded headliner material and sensitive electronics.
Finish with source removal. Clean, dry and ventilate before odor treatment. Airflow helps dry cleaned fabric. Odor-source removal and suitable ventilation are emphasized; specialist ozone treatment is not depicted as routine finishing.
Correction is conditional. Confirm the finish before removing any material. An inspection light reveals a glossy painted panel and marks a limited test area. Correction remains conditional on finish, condition and qualified assessment.
Protect edges and trim. Skip uncertain finishes and vulnerable edges. Tape separates trim, badges and vulnerable edges from the bounded correction area. Sanding is not presented as a mandatory service step.
Work a small test section. Use the least aggressive suitable process. A clean correction pad moves in limited overlapping passes within the approved test area. Product and equipment instructions govern use; sanding is not shown.
Refine, wipe and reassess. Inspect between passes before choosing protection. A fresh finishing pad refines only approved work where needed. A clean towel removes residue and an inspection light checks the result before protection.
Choose one protection path. Wax or sealant is an alternative to ceramic. Two separate closed product options appear beside a clean approved panel. A route marker selects wax or sealant without stacking it over ceramic coating.
Prepare the approved surface. Use the chosen product’s compatible preparation method. A clean towel removes residue from compatible non-contact bodywork with the protection system’s approved preparation product. No universal alcohol recipe is shown.
Apply a thin, even layer. Use clean applicators on compatible paint. A clean pad distributes a thin even wax or sealant layer in a small section, without flooding trim or applying a heavy blanket coat.
Buff and inspect. Follow labelled wipe-off and cure directions. Fresh towels remove residue at the product’s instructed stage. An angled light confirms even coverage and a clean finish.
Ceramic is an alternative. Choose compatibility before coating any surface. The protection route marker selects ceramic as an alternative to wax or sealant. Only an approved clean non-contact finish enters the treatment area.
Coat a small approved section. Use controlled passes and the prescribed amount. A small applicator makes controlled crossing passes on prepared compatible paint. A measured-use cue follows the chosen coating system’s instructions.
Level and remove excess. Watch the product’s flash and wipe-off cues. An inspection highlight reveals excess on the treated panel. Fresh towels level and remove it at the product’s instructed flash stage; no generic stopwatch dictates timing.
Respect every material boundary. Glass, trim and wheels need separate approvals. Separate glass, trim and wheel records show that each substrate needs its own approved product. The chosen system’s cure and water-exposure instructions conclude protection.
Inspect. Document. Explain.. Check clean, dry surfaces and record remaining concerns.
Care matched to your vehicle. Included work depends on package, condition and material approval.
Read the complete checklist. /guides/auto-detailing Johnny Detail. /guides/auto-detailing.
For a Katy family car, show mats, seat edges and pockets that collect everyday debris. For a lightly used vehicle, explain whether the paint or cabin is the main concern. A useful request identifies those priorities before a package is selected, rather than treating every car as the same amount of work.
Tell us what looks dull, feels rough or remains visible after washing. Painted panels, wraps and matte sections need compatible care, while an earlier coating should be identified. Suitable cleaning and preparation come before any decision on polishing. A protective treatment cannot repair deep scratches or failing clear coat.
Katy city limits sit on both sides of I-10, and a Katy address label alone is insufficient to plan a setup. Confirm the intended property and permission for work. Show room to open doors and any gate restrictions. Describe covered or outdoor parking as the vehicle’s actual routine when discussing future maintenance.
Clear personal belongings and identify delicate accessories, spills or pet hair before the appointment. Compare existing auto packages with the requested interior and exterior priorities. Heavier condition-dependent work needs confirmation. Ask for upkeep suited to the finish afterward, and set realistic expectations for worn upholstery or damaged paint.
Provide the actual property and parking arrangement. Permission, gates and working clearance must be reviewed alongside the vehicle’s location.
Show the areas that concern you and describe everyday use. Compare their package inclusions before adding condition-dependent work.
No. Protection and repair are different tasks. Assess a suitable finish and any preparation before discussing an added treatment.
Yes. Repairs, wraps and existing protection can affect compatible cleaning and refinement choices. Identify them in the initial request.
Remove valuables and loose belongings and point out fixed accessories or delicate items. Discuss special installed equipment before assuming removal.
Please note that a $16.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $22.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $33.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $18.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $25.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $35.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $20.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $28.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $40.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $23.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $33.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $45.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Plan your next detail
Tell us what you drive, how you use it, and where you would like your mobile appointment.
Compare steam and extraction for leather and fabric stains, with material checks, moisture control, careful drying, and equipment-specific guidance.
Read the guide
Learn when iron fallout removal and mechanical decontamination may help before wax or sealant, with product-label checks and gentle paint assessment.
Read the guide
Compare car wax and paint sealant for dark, light, and metallic finishes, including appearance, compatibility, preparation, and upkeep tradeoffs.
Read the guide
