We have a great sale going on right now
for new customers. Book a detail for 99¢! *
CONTACT US
Johnny Detail. Auto detailing. Six care chapters introduce material-specific cleaning and conditional finish decisions.
Start with the wheels. Rinse cool wheels before cleaning. A gentle rinse loosens grit on cool wheel faces and sidewalls before any cleaner or brush touches them.
Use dedicated wheel tools. Separate dirty-area brushes from bodywork tools. A dedicated tire brush loosens remaining dirt; a separate soft brush follows accessible wheel faces while avoiding brakes and seals.
Clean the accessible recesses. Choose products approved for the wheel finish. Approved wheel cleaner and a suitable small brush address accessible wheel recesses. A label-check marker precedes use; cleaner is rinsed before drying.
Finish the sidewalls. Dry first. Keep dressing on sidewalls only. A dedicated towel dries the wheel before a small applicator treats the clean tire sidewall, keeping product off the tread.
Loosen dirt before contact. Work from upper panels toward lower dirt. Loose dirt rinses from upper car bodywork down toward the lower panels. Surface grit lifts before the wash mitt approaches.
Keep the wash mitt clean. Use separate wash and rinse buckets. A clean mitt makes light controlled passes on bodywork, returns to the rinse bucket, then reloads with wash solution. Dirty lower tools remain separate.
Decontaminate only as needed. Match the product to the actual finish. A finish check leads to targeted decontamination only where required. On riders, matte surfaces, decals and unknown plastics are excluded from paint-specific treatment.
Rinse, dry and inspect. Use approved methods on seams and clear surfaces. Final rinsing removes wash residue; clean towels dry the car, followed by separate jamb and exterior-glass wiping.
Clear the care area. Remove loose belongings before cleaning. Floor mats lift out for separate care. Loose debris and pet hair are removed before the interior is vacuumed.
Reach the hidden dust. Brush vents and vacuum accessible crevices. A soft brush lifts dust from vents and crevices while a vacuum collects it. A cloth wipes compatible interior panels without wetting electronics.
Clean fabric in sections. Extract cleaning solution; respect material limits. Compatible fabric is shampooed and extracted in small sections. Tools stay off bonded headliner material and sensitive electronics.
Finish with source removal. Clean, dry and ventilate before odor treatment. Airflow helps dry cleaned fabric. Odor-source removal and suitable ventilation are emphasized; specialist ozone treatment is not depicted as routine finishing.
Correction is conditional. Confirm the finish before removing any material. An inspection light reveals a glossy painted panel and marks a limited test area. Correction remains conditional on finish, condition and qualified assessment.
Protect edges and trim. Skip uncertain finishes and vulnerable edges. Tape separates trim, badges and vulnerable edges from the bounded correction area. Sanding is not presented as a mandatory service step.
Work a small test section. Use the least aggressive suitable process. A clean correction pad moves in limited overlapping passes within the approved test area. Product and equipment instructions govern use; sanding is not shown.
Refine, wipe and reassess. Inspect between passes before choosing protection. A fresh finishing pad refines only approved work where needed. A clean towel removes residue and an inspection light checks the result before protection.
Choose one protection path. Wax or sealant is an alternative to ceramic. Two separate closed product options appear beside a clean approved panel. A route marker selects wax or sealant without stacking it over ceramic coating.
Prepare the approved surface. Use the chosen product’s compatible preparation method. A clean towel removes residue from compatible non-contact bodywork with the protection system’s approved preparation product. No universal alcohol recipe is shown.
Apply a thin, even layer. Use clean applicators on compatible paint. A clean pad distributes a thin even wax or sealant layer in a small section, without flooding trim or applying a heavy blanket coat.
Buff and inspect. Follow labelled wipe-off and cure directions. Fresh towels remove residue at the product’s instructed stage. An angled light confirms even coverage and a clean finish.
Ceramic is an alternative. Choose compatibility before coating any surface. The protection route marker selects ceramic as an alternative to wax or sealant. Only an approved clean non-contact finish enters the treatment area.
Coat a small approved section. Use controlled passes and the prescribed amount. A small applicator makes controlled crossing passes on prepared compatible paint. A measured-use cue follows the chosen coating system’s instructions.
Level and remove excess. Watch the product’s flash and wipe-off cues. An inspection highlight reveals excess on the treated panel. Fresh towels level and remove it at the product’s instructed flash stage; no generic stopwatch dictates timing.
Respect every material boundary. Glass, trim and wheels need separate approvals. Separate glass, trim and wheel records show that each substrate needs its own approved product. The chosen system’s cure and water-exposure instructions conclude protection.
Inspect. Document. Explain.. Check clean, dry surfaces and record remaining concerns.
Care matched to your vehicle. Included work depends on package, condition and material approval.
Read the complete checklist. /guides/auto-detailing Johnny Detail. /guides/auto-detailing.
Begin a Pasadena car request with the places that bother you most: crumbs beneath seats, dusty dashboard recesses or glass that needs cleaning. Describe passengers, pets and recent spills. That information helps distinguish a regular refresh from condition-dependent interior work instead of choosing solely by the vehicle’s size.
A dull panel can reflect contamination, fine defects or a damaged finish. Show the paint in useful light and identify repainted areas, wraps and existing protection. Washing, decontamination and polishing are different steps. A protective product should follow suitable preparation rather than conceal an unresolved surface problem.
Tell us whether the car is at home or in shared parking, and obtain the property’s permission. Doors need opening room, while equipment needs safe clearance around the vehicle. A visit near Armand Bayou or another local destination does not imply that its parking area permits detailing.
Remove personal belongings and point out delicate trim before the appointment. Compare the existing interior and exterior packages, then confirm heavy-soil requests separately. Ask for maintenance directions matching the chosen finish treatment. Cleaning can improve removable deposits, but torn upholstery, deep scratches and failed paint call for realistic limits.
Start with your main concern—cabin, exterior or both—and compare those inclusions. Vehicle size and heavier condition-dependent work should be confirmed before booking.
No. The material, age of the spill and prior damage affect what cleaning can achieve. Show the area before agreeing the work.
Only the confirmed scope controls that. A wash removes suitable dirt; polishing is a separate decision after the finish is assessed.
Parking permission alone is insufficient. Confirm the site allows cleaning activity and has suitable clearance before proposing it.
Clear personal items and valuables, and identify fragile accessories. Discuss installed child seats or equipment rather than assuming they will be removed.
Please note that a $16.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $22.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $33.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $18.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $25.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $35.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $20.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $28.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $40.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $23.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $33.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Please note that a $45.00 deposit (10% of the service total) is required to reserve your appointment, and is applied toward your final balance.
Plan your next detail
Tell us what you drive, how you use it, and where you would like your mobile appointment.
Compare steam and extraction for leather and fabric stains, with material checks, moisture control, careful drying, and equipment-specific guidance.
Read the guide
Learn when iron fallout removal and mechanical decontamination may help before wax or sealant, with product-label checks and gentle paint assessment.
Read the guide
Compare car wax and paint sealant for dark, light, and metallic finishes, including appearance, compatibility, preparation, and upkeep tradeoffs.
Read the guide
